Shop

  • 0 out of 5

    Surface Resistance Meter 9V

    Our 9V Surface Resistance Meter is designed to measure surface resistivity and resistance to ground. The meter will quickly, easily and accurately test conductive, static dissipative and insulative surfaces. This resistivity meter can be reliably used between 5oC – 49oC, making it suitable for a wide rage of environments.

    $225.00
  • 0 out of 5

    Wrist Strap Tester 9V with Wall Mount and Footplate

    This 9V Wrist Strap Tester is designed to show high/low fail and pass functions, and – as it can also test footwear prior to entering in EPA – it comes with both a wall mount and footplate. CE approved, this product is powered by a 9V battery, and features a low battery indicator light for convenience.

    Quick and simple ‘one touch’ test function.

    $169.00
  • 0 out of 5

    100% Polyester 120gsm Wipes

    These heavy weight laser sealed edge 120gsm cleanroom polyester dry wipes are designed for cleanroom environments where the prevention of particle and fibre release is critical.

    Solvent safe, double-bagged, and vacuum cleanroom packed.

    From $27.81
  • 0 out of 5

    Antistat ESD Short Sleeve Polo Shirt

    Our Antistat ESD short sleeve polo shirts are ideal for use within an EPA area in warm environments. The ESD symbol on the sleeve allows easy identification. Our polo shirts are machine washable on cold only and the EN 61340-5-1 electrical properties are maintained after more than 40 launderings.

    Available in four sizes and four colors.

    $25.74
  • 0 out of 5

    Antistat ESD Short Sleeve T-Shirt

    This high-quality ESD short sleeve t-shirt is designed to be worn within an ESD Protected Area. Unlike conventional clothing which can generate and retain charges, the special knitted fabric of our T-Shirts actively dissipates harmful charges, helping to prevent damage to ESD sensitive components or equipment.

    Available in four sizes and five different colors.

    $33.34
  • 0 out of 5

    Anti-Static Contamination Control Mats

    Our multi-layered, Antistatic Contamination Control Mats are suitable for clean environments up to an ISO 5 rating. Help control particle contamination by capturing debris from the soles of shoes, each mat has 30 peel-off layers, making it easy to maintain a clean, effective surface.

    Available in 3 sizes with 30 sheets per mat, and 4 mats per case.

     

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

    **Lead times apply. Currently shipping in 6-8 weeks.

    From $110.00
  • 0 out of 5

    Anti-Static Finger Cots

    These 100% natural latex Finger Cots are cleanroom compatible to ISO 5 rating. The non-sterile cots are packaged in anti-static bags for additional security and are available in four different sizes for operator comfort.

    Order yours today.

    $38.32
  • 0 out of 5

    Anti-Static 3-Layer ESD Mats (Smooth)

    This 3-layer smooth finish anti-static bench and floor matting provide excellent ESD protection for your workspace. Excellent lay-flat properties for quick installation, and easy to clean, this will prove to be a hard-wearing matting solution.

    Available pre-cut with a 10mm press stud in each corner.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

    $113.70
  • 0 out of 5

    Anti-Static Mat – Rubber, Textured Finish

    A high quality, Textured Rubber ESD Mat designed for use on benches within the EPA with glare reduction properties for the comfort of operators. The natural resilience of rubber makes this mat extremely hard-wearing, and resistant to chemical agents normally used for maintenance.

    Suitable for loose-laying and supplied with a 10mm press stud in each corner for convenience.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

    $106.35
  • 0 out of 5

    Anti-Static Ring Binders

    These Anti-Static Ring Binders are designed to replace standard high charging insulative binders within the EPA. In portrait orientation, these folders are finished in high quality, permanently anti-static blue PVC and come with either 25mm or 50mm rings. The ESD warning symbol is featured on the front and spine of the ring binder, and there is also a 65mm spine label pocket for efficiency.

    Available in 2 and 4 hole configurations, with either 25mm or 50mm D-ring mechanisms.

    From $13.45
  • 0 out of 5

    Pink Anti-Static Bags (Grip Seal)

    Anti-Static poly bags prevent build-up of electrostatic fields in an ESD protected area when storing non-ESD sensitive devices, like as screws and bolts. They do this by dissipating a static charge to ground. The grip-lock seal keeps items safely inside the bag until they’re required.  These quality, blow-molded bags with anti-static additives are made from LDPE & LLDPE.

    Custom sizes and print are available upon request.

    Sold in packs of 100

    From $5.80
  • 0 out of 5

    Static Shielding Bags (Open Top)

    Open-top, Static Shielding Bags are the perfect solution for protecting sensitive electronic products or equipment from electrostatic discharge (ESD) during storage and transit. The 4-layer construction guards against charges inside and outside the bag, and are semi-transparent for easy content identification. These Static Shielding Bags can be used for safe storage of PCBs, integrated circuits, motherboards, computer components & more.

    Great range of standard sizes from stock, custom sizes and print available on request. Contact our team today to find out more, email us here.

    From $3.98