ESD Bench and Floor Mats

ESD Bench Matting

ESD rubber bench and floor matting is designed to drain static charge from items placed on its surface.

For a mat to effectively ground an item, it must be either conductive or dissipative and be connected to a suitable grounding point. ESD mats are generally available as Vinyl or Rubber mats.

  • 0 out of 5

    Anti-Static 3-Layer ESD Mats (Smooth)

    This 3-layer smooth finish anti-static bench and floor matting provide excellent ESD protection for your workspace. Excellent lay-flat properties for quick installation, and easy to clean, this will prove to be a hard-wearing matting solution.

    Available pre-cut with a 10mm press stud in each corner.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

  • 0 out of 5

    Anti-Static Mat – Rubber, Textured Finish

    A high quality, Textured Rubber ESD Mat designed for use on benches within the EPA with glare reduction properties for the comfort of operators. The natural resilience of rubber makes this mat extremely hard-wearing, and resistant to chemical agents normally used for maintenance.

    Suitable for loose-laying and supplied with a 10mm press stud in each corner for convenience.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

  • 0 out of 5

    ESD Bench Mat – 2 Layer, Textured Finish

    A Textured, 2-Layer ESD Bench Mat is designed for use within EPA workspaces. The surface of this bench mat is designed with a reflection breaking finish to reduce glare and improve operator comfort. The matting also provides protection against small collisions thanks to the forgiving nature of rubber.

    Mat has good heat, chemical and oil resistance.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

  • 0 out of 5

    ESD Bench Mat – Textured Finish

    This high-quality 2-Layer ESD Bench Matting with Textured Finish for use in workshops or laboratories of microelectronics industries protects sensitive components from the dangers of ESD, while also reducing glare to improve operator comfort.

    Can be loose-laid at the work bench. No adhesives required.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

  • 0 out of 5

    ESD Bench Mat 2 Layer – Smooth Finish

    Manufactured from synthetic rubber, this 2 layer mat consists of a 0.5mm thick static-dissipative surface layer and a 1.5mm thick conductive bottom layer making it suitable for use in an EPA.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.

  • 0 out of 5

    Floor Matting Anti-Slip

    A multi-purpose, anti-static / ESD mat for use on either workstation benches or as a flooring solution in the workshops of advanced laboratories for microelectronic industries. Made from anti-static (conductive) and static-dissipative materials with synthetic rubber.

    Easy to clean and resistant to impact, cuts and tears.

    *Sizes rounded up to nearest imperial foot. See table below for exact dimensions.